Filter
Gutter corners & accessories

Material

Construction

Nominal size

Gutter type

Type of installation


Hide details

Gutter corner - exterior corner - 90° - half round

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The deep-drawn gutter corner made from one piece counterbalances low tolerances on the building. The recessed bead with insertion slot makes installation easier. The seam is perfectly prepared for soldering. next

Gutter corner - interior corner - 90° - half round

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The deep-drawn gutter corner made from one piece counterbalances low tolerances on the building. The recessed bead with insertion slot makes installation easier. The seam is perfectly prepared for soldering. next

Gutter corner welded - exterior corner - 90° - half round

Size: 333
Material:

The welded gutter corner is a compelling choice due to its consistent material thickness. The mitre joint allows for a precise angle guide and can be directly attached to the eaves with no gap. The recessed bead with insertion slot makes installation easier. The seam is perfectly prepared for soldering. next

Gutter corner welded - interior corner - 90° - half round

Size: 333
Material:

The welded gutter corner is a compelling choice due to its consistent material thickness. The mitre joint allows for a precise angle guide and can be directly attached to the eaves with no gap. The recessed bead with insertion slot makes installation easier. The seam is perfectly prepared for soldering. next

Gutter corner - exterior corner - 90° - half round - side length 500 mm

Size: 200 / 250 / 280 / 333 / 400
Material:

The gutter corner with a side length of 500 mm allows small distances to be bridged without installing additional gutter pieces. A gutter return, for example, can be created quickly with the combination of interior corner and exterior corner. next

Gutter corner - interior corner - 90° - half round - side length 500 mm

Size: 200 / 250 / 280 / 333 / 400
Material:

The gutter corner with a side length of 500 mm allows small distances to be bridged without installing additional gutter pieces. A gutter return, for example, can be created quickly with the combination of interior corner and exterior corner. next

Gutter corner - exterior corner - 135° (=45°)<br/>half round - side length 300 mm

Size: 200 / 250 / 280 / 333 / 400
Material:

45° corners are mounted on the building quickly and properly with the 135° gutter corner. next

Gutter corner - interior corner - 135° (=45°)<br/>half round - side length 300 mm

Size: 200 / 250 / 280 / 333 / 400
Material:

45° corners are mounted on the building quickly and properly with the 135° gutter corner. next

Gutter corner - exterior corner - 90° - box

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

This gutter corner is available in a drawn or soldered design depending on supplier. So an item description can’t be given! next

Gutter corner - interior corner - 90° - box

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The deep-drawn gutter corner is made from one piece, and carries rainwater safely around the corner. next

Plug-in gutter end cap, half round left

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The plug-in gutter end cap is the perfect closure for the gutter! It holds by itself. Thanks to the mortise groove, soldered or adhering can be done with both hands. next

Plug-in gutter end cap, half round right

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The plug-in gutter end cap is the perfect closure for the gutter! It holds by itself. Thanks to the mortise groove, soldered or adhering can be done with both hands. next

Gutter end cap half round universal

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The universal gutter end cap for half round gutters can be mounted on either the left or right end of the gutter. next

Gutter end cap half round universal - high

Size: 250 / 280 / 333 / 400
Material:
Not available in all sizes

The universal gutter end cap for half round gutters can be mounted on either the left or right end of the gutter. The high design provides a seal from the hem to the bead. next

Gutter end cap, half round left

Size: 200 / 250 / 280 / 333 / 400 / 500
Material:

The no-frills gutter end cap for half round gutters. next

Gutter end cap, half round right

Size: 200 / 250 / 280 / 333 / 400 / 500
Material:

The no-frills gutter end cap for half round gutters. next

Gutter end cap box shape universal

Size: 200 / 250 / 280 / 333 / 400
Material:
Not available in all sizes

The universal gutter end cap for box gutters can be mounted on either the left or right end of the gutter. next

Gutter end cap box shape left

Size: 200 / 250 / 333 / 400 / 500
Material:

The no-frills gutter end cap for box gutters. next

Gutter end cap box shape right

Size: 200 / 250 / 333 / 400 / 500
Material:

The no-frills gutter end cap for box gutters. next

Rooftop gutter end cap left

Size: 400 / 500
Material:

The gutter end cap for the rooftop gutter. next

Rooftop gutter end cap right

Size: 400 / 500
Material:

The gutter end cap for the rooftop gutter. next

Storm clip

Size: 250-400
Material:

Storm clips help the rain gutter to keep its shape, even when there are large amounts of snow. They are also known as bead retainers or straddles next

Gutter quadrant, universal with pin

Size: 280 / 333 / 400
Material:

The harmonious finishing touch on the end of the gutter. The gutter quadrant can easily be mounted on the left or the right end of the gutter.
The bead pin and the tapered soldered edge guarantee quick mounting. next

Gutter quadrant, universal

Size: 200 / 250 / 280 / 333 / 400
Material:

The harmonious finishing touch on the end of the gutter. The gutter quadrant can easily be mounted on the left or the right end of the gutter. next

Gutter expander - with cover - half round

Size: 250 / 280 / 333 / 400 / 500
Material:

The expander is vulcanised on both sides and is suitable for installation between half round gutters.
The rubber is covered up in the visible area. next

Gutter expander - half round

Size: 250 / 280 / 333 / 400 / 500
Material:
Not available in all sizes

The expander is vulcanised on one side and suitable for installing in half round gutters. next

Gutter expander - with cover - box shape

Size: 250 / 333 / 400 / 500
Material:

The expander is vulcanised on both sides and suitable for installing between box gutters. The rubber is covered in the visible area. next

Gutter expander - box shape

Size: 250 / 333 / 400 / 500
Material:

The expander is vulcanised on one side and suitable for installing in box gutters. next

Tape expander

Size: 260/3000 / 390/3000 / 390/6000
Material:

The tape expander is a custom solution for all self-trimmed profiles and gutters. next

Single-head expander

Size: 390/700 / 390/800
Material:

The single-head expander for installing in flat roofs. It’s used on long eave rims and edge trims that are stuck or welded in. next

Bead trim

Size: 250/280 / 333 / 400/500
Material:

The bead trim is required as the upper cover trim for gutter dilatation. Through the orifice plate the precipitation water is led into the gutter and cannot penetrate behind the movement compensator. next

Universal Gutter expander half round

Size:
Material:

GRÖMO's Universal Channel Dilatation is a true all-rounder. Whether initial assembly or repair of old and brittle movement compensations. The Universal Dilatation can be easily glued into any semicircular channel. The corrugated dilatation area of the EPDM rubber reliably compensates for material expansions of up to 50 mm and prevents the dilatation from throwing up in the watercourse. The Universal Dilatation can easily be cut to the right gutter size. Pre-roughened adhesive surfaces guarantee a secure and durable connection. Simply grind and clean the gutter, attach the bead trim, glue - done.
The separately available bead trim provides effective protection against the ingress of water and dirt into the movement compensation. next

Gutter connector, half round

Size: 250 / 280 / 333 / 400
Material:

With the gutter connector, two half round gutters can be put together. It is also suitable for sealing faulty gutter connections. next

Fascia bracket half round

Size: 200 / 250 / 280 / 333 / 400
Material:

The gutter support is suitable for all vertical eaves. The hook is fastened directly onto the fascia board or brickwork. No need to painstakingly bend the iron bracket. next

Leaf sieve

Size: 60 / 75-80 / 85-90 / 100 / 120 / 150
Material:
Not available in all sizes

The gutter leaf catch is good for universal use and works with everything from the soldering support to the hopper.
It safely and reliably prevents leaves from entering the downpipe. next

Leaf guard half round

Size: 280 / 333
Material:

The leaf guard provides the half round gutter with reliable protection from leaves. The guard’s geometry ensures that the leaves dry off quickly and then blow away freely with the wind. next

Gutter accessories from GRÖMO.

It comes down to the accessories.

The roof drainage system has the task of collecting the rainwater or meltwater running down from the roof and drain it in a controlled manner. Because moisture penetration of outer and cellar walls is avoided in this way, it’s important that you can rely on it at all times. This type of system consists of the roof gutter, the connecting rainwater downpipe, and the connecting pieces.
The gutter accessories are crucial for this if absolute reliability is required. Whether gutter outlets, gutter corners, gutter end caps, or gutter connectors, the long straight lines aren’t where it matters. It’s the places in the rain gutter where two parts come together and need a perfectly tight connection. And no less important is the gutter bracket. After all, they aren’t just for responsible for mounting the gutters straight, but also guarantee smooth run-off of rainwater due to the security of the necessary slope. In doing so, the brackets are often matched to the appearance and material of the rain gutter to create a cohesive overall effect on the facade. Leaf grilles and leaf catchers protect the system from heavy contamination from leaves and other objects, and consequently also from clogging the roof drainage system.
 

Different materials – one quality.

Only when quality is right from the beginning can the final result be perfect. GRÖMO approaches the selection of their materials with this aspiration. This motto, combined with years of experience as manufacturers of premium gutter accessories, puts GRÖMO in the position to make products in virtually all common materials. And this, always, in the customary GRÖMO quality. Be it zinc, pre-weathered zinc, copper, galvanized steel, tin-plated, rolled, or polished steel, or aluminum, the pieces are always corrosion-resistant, long-lasting, sturdy, functional, and suitable for many areas of application. The components available in layouts of 200 to 500 mm are all manufactured and monitored in accordance with DIN EN 612.
 

Security with aesthetic appeal.

In the matter of accessories for roof gutters, GRÖMO is at the highest level for metalworking. The objective is to give customers security of getting first-class products, and consequently first-class results. In this, however, the extraordinary quality is not their sole focus. The visual aspect of the gutter and the accompanying accessories is equally important. The combination of innovative technology, top quality production, and aesthetic appeal ensures that GRÖMO gutter accessories have outstanding features. This is apparent not least in the designer line, whose products have already been distinguished with several design awards due to their appearance.